Maintain your jack
Click to go to the MAINTENANCE page.
Transfer the jack body from one pole to another
This is specifically for transferring from the original Single Pole to a Segmented pole with threads.
Take any segmented section (other than the bottom section with the roll pin). Match up the end of a Segmented pole with the top of the full sized Single pole.
- Insert the threaded end into the original pole.
- Squeeze the tabs on the jack body together so the body can slide freely.
- In a smooth motion slide the body up from one pole to the other.
If there is resistance going onto the segmented pole it helps to rotate the jack body back and forth around the pole. Do not attempt to force it. Achieve a free sliding motion before you attempt to go from one pole to the other.